The bearings you mentioned, 3215Un, 3215, e 5215, are likely part of a standard bearing series. Here’s a breakdown of their possible meanings:
1. 3215A and 3215
- These are likely tapered roller bearings.
- Le 32 series typically refers to tapered roller bearings with a specific design and dimensions.
- Le 15 indicates the bore diameter. For metric bearings, the bore diameter is calculated as:
- Bore diameter = 15 × 5 = 75 millimetro.
- Le Un in 3215Un might indicate a specific design variant or internal clearance. However, the exact meaning of “Un” can vary depending on the manufacturer.
2. 5215
- This is likely an angular contact ball bearing or a thrust ball bearing.
- Le 52 series often refers to angular contact or thrust bearings.
- Le 15 again indicates the bore diameter:
- Bore diameter = 15 × 5 = 75 millimetro.
Key Differences:
- 3215A/3215: Cuscinetti a rulli conici, designed to handle combined radial and axial loads.
- 5215: Angular contact or thrust ball bearings, designed primarily for axial loads or combined loads with a specific contact angle.
Applicazioni:
- 3215A/3215: Commonly used in automotive, industrial gearboxes, and heavy machinery.
- 5215: Often used in applications requiring high axial load capacity, such as machine tool spindles or thrust assemblies.
Notes:
- Always refer to the manufacturer’s catalog for precise specifications, as bearing codes can vary slightly between manufacturers.
- Le “Un” suffix in 3215Un might indicate a specific internal design or clearance, so confirm with the supplier if this is critical for your application.
If you have additional details or specific requirements, feel free to share!
