Name: Angular Contact Ball Bearing QJ206MA SKF, NSK, FAG, Timken
SKU: 4281
Availability: InStock

Angular Contact Ball Bearing QJ206MA SKF, ಎನ್.ಎಸ್.ಕೆ, FAG, Timken

¥0.00

PECIFICATIONS:

ಒಳ ವ್ಯಾಸ(ಮಿಮೀ)	30
ಹೊರಗಿನ ವ್ಯಾಸ(ಮಿಮೀ)	62
ಅಗಲ(ಮಿಮೀ)	16
ತೂಕ(ಕೆ.ಜಿ)	0.24
ವಸ್ತು	SS/GCr15
ಕೊ(ಕೆಎನ್)	30.5
Cr(ಕೆಎನ್)	37.5
ತೈಲ ನಯಗೊಳಿಸುವ ವೇಗ (rpm)	17000

REPLACES:

SKF:QJ206MA

Angular contact bearing installation precautions 1. Bearing installation should be performed in a dust-free and clean room. Bearings must be carefully selected. Bearing spacers must be ground. The parallelism of the spacers should be controlled at 1um while maintaining the same height of the inner and outer ring spacers. the following; 2. The bearing should be cleaned before installation. When cleaning, the inner ring slope is upward, the hand induction is flexible, and there is no stagnation. After drying, put in a specified amount of grease. 3. Special tools should be used for bearing installation, and the force should be uniform. Knocking is strictly prohibited; 4. The bearings should be stored clean and ventilated, without corrosive gas, and the relative humidity should not exceed 65%. Long-term storage should prevent rust regularly.

ವಿಚಾರಣೆ

ದಿ QJ206MA is a specific type of ಕೋನೀಯ ಸಂಪರ್ಕ ಬಾಲ್ ಬೇರಿಂಗ್. ಅದರ ಪ್ರಮುಖ ವೈಶಿಷ್ಟ್ಯಗಳು ಮತ್ತು ವಿಶೇಷಣಗಳ ಸ್ಥಗಿತ ಇಲ್ಲಿದೆ:

1. Type of Bearing:

ಕೋನೀಯ ಸಂಪರ್ಕ ಬಾಲ್ ಬೇರಿಂಗ್: Designed to handle combined radial and axial loads, these bearings have contact angles that enable them to support higher axial loads compared to deep groove ball bearings. They are typically used in pairs or sets to accommodate loads in both directions.

2. ಬೇರಿಂಗ್ ಹುದ್ದೆ:

QJ206MA:
- QJ: Indicates a four-point contact ball bearing, which is a type of angular contact bearing. It can handle axial loads in both directions and radial loads simultaneously.
- 206: ಬೇರಿಂಗ್ನ ಗಾತ್ರವನ್ನು ನಿರ್ದಿಷ್ಟಪಡಿಸುತ್ತದೆ. ದಿ “2” indicates a light series, and “06” refers to the bore diameter (30 ಮಿಮೀ).
- MA: Denotes the material or design specifics. “MA” typically means the bearing has a brass cage (retainer) and is designed for high-speed applications.

3. ಆಯಾಮಗಳು:

ಬೋರ್ ವ್ಯಾಸ (ಡಿ): 30 ಮಿಮೀ
ಹೊರಗಿನ ವ್ಯಾಸ (ಡಿ): 62 ಮಿಮೀ
ಅಗಲ (ಬಿ): 16 ಮಿಮೀ

4. Load Ratings:

ಡೈನಾಮಿಕ್ ಲೋಡ್ ರೇಟಿಂಗ್ (ಸಿ): The maximum load the bearing can handle while rotating.
ಸ್ಥಿರ ಲೋಡ್ ರೇಟಿಂಗ್ (C0): The maximum load the bearing can handle while stationary.

(Exact load ratings depend on the manufacturer and should be verified from the product datasheet.)

5. ಅಪ್ಲಿಕೇಶನ್‌ಗಳು:

Angular contact ball bearings like the QJ206MA are commonly used in:
- ಯಂತ್ರ ಉಪಕರಣ ಸ್ಪಿಂಡಲ್ಗಳು
- ಪಂಪ್ಗಳು
- ಗೇರ್ಬಾಕ್ಸ್ಗಳು
- ಹೆಚ್ಚಿನ ವೇಗದ ಅಪ್ಲಿಕೇಶನ್‌ಗಳು
- Applications requiring precise axial and radial load handling

6. Cage Material:

ದಿ “MA” suffix indicates a brass cage, which is durable and suitable for high-speed operations.

7. Lubrication and Sealing:

ವಿಶಿಷ್ಟವಾಗಿ, these bearings are lubricated with grease or oil. Sealing options (ಉದಾ., rubber seals or metal shields) may vary depending on the application.

8. ಆರೋಹಿಸುವಾಗ:

ಕೋನೀಯ ಸಂಪರ್ಕ ಬೇರಿಂಗ್ಗಳನ್ನು ಹೆಚ್ಚಾಗಿ ಜೋಡಿಯಾಗಿ ಜೋಡಿಸಲಾಗುತ್ತದೆ (back-to-back, face-to-face, or tandem) to handle axial loads in both directions.

If you need more specific details (ಉದಾ., ಲೋಡ್ ರೇಟಿಂಗ್‌ಗಳು, tolerances, or exact dimensions), refer to the manufacturer’s datasheet or product catalog. Popular manufacturers of such bearings include SKF, ಎನ್.ಎಸ್.ಕೆ, FAG, and Timken.

ಕೋನೀಯ ಸಂಪರ್ಕ ಬಾಲ್ ಬೇರಿಂಗ್ಗಳು