ווינקלדיק קאָנטאַקט פּילקע בערינגז

די Angular Contact Ball Bearing 3204ATN9 is a specific type of bearing designed to handle combined radial and axial loads. דאָ איז אַ ברייקדאַון פון זייַן הויפּט פֿעיִקייטן און ספּעסאַפאַקיישאַנז:

1. טיפּ: Angular Contact Ball Bearing

• Angular contact bearings are designed to support combined loads (both radial and axial) and are typically used in applications where high precision and rigidity are required.

2. שייַכעס באַצייכענונג: 3204ATN9

• 3204: This indicates the bearing’s size and series.
  • 3: סעריע (light or medium duty).
  • 204: נודנע דיאַמעטער (20 mm) and outer diameter (47 mm).
• א: Contact angle (typically 30° for angular contact bearings).
• TN9: Indicates the cage material and design.
  • TN: פּאָליאַמידע (nylon) cage, which is lightweight and suitable for high-speed applications.
  • 9: Likely refers to a specific internal design or clearance.

3. דימענשאַנז:

• נודנע דיאַמעטער (ד): 20 mm
• ויסווייניקסט דיאַמעטער (ד): 47 mm
• ברייט (ב): 14 mm (typical for this series, but confirm with manufacturer specs).

4. מאַסע קאַפּאַציטעט:

• Angular contact bearings are designed to handle both radial and axial loads. The exact load capacity depends on the contact angle and bearing design.
• דינאַמיש לאָוד שאַץ (ג): Typically in the range of 10-15 kN (check manufacturer specs).
• סטאַטיק לאָוד שאַץ (C0): טיפּיקאַללי אַרום 5-10 kN (check manufacturer specs).

5. ספּיד רייטינג:

• Suitable for high-speed applications due to the polyamide cage (TN9).
• Exact speed limits depend on lubrication and operating conditions.

6. אַפּפּליקאַטיאָנס:

• Commonly used in:
  • מאַשין געצייַג שפּינדל.
  • פּאַמפּס.
  • גירבאַקס.
  • High-speed motors.
  • Any application requiring precise axial and radial load handling.

7. לובריקיישאַן:

• Typically lubricated with grease or oil, depending on the application and speed requirements.

8. מאַונטינג:

• Angular contact bearings are often mounted in pairs (back-to-back or face-to-face) to handle axial loads in both directions.

9. רעשוס:

• The internal clearance is typically specified by the manufacturer and depends on the application (ע.ג., C2, CN, C3).

10. Manufacturer Variations:

• Different manufacturers may have slight variations in design, load ratings, and tolerances. Always refer to the specific datasheet for the exact bearing you are using.

If you need more detailed specifications or have a specific application in mind, לאָזן מיר וויסן!